Kim Demiş SIEMENS'in GiZLi Kodu Yok Diye...Buyurun Buradan!!!

[█►SALVADOR◄█]

* # 06 #
(IMEI) shows the series number of any telephone GSM, if we then harvest
to the left key for warming up, then the number of the version of the
piercing (in some telephones necessary to harvest right key) will be
shown.
* # 05 # Operating Time - will show the time of the work of telephone
and the time of the conversations (Sym- map it must be inserted).
* # 0606 # then to harvest to the left key for warming up - the presence
of blockings will show. Attention!: Sym- map must be taken out.
* # 0000 # then green pipe - automatic is selected the language, to which to relate Sym- map, most frequently - English.
* # 9999 # then green pipe - discards the parameters of telephone to the plant. Installations on the Sym- map do not change.
* # 0001 # then green pipe - is established the English of menu. Installations on the Sym- map do not change.
* # 0007 # then green pipe - is established the Russian language of menu. Installations on the Sym- map do not change.
* # 0030 # then green pipe = Greek. Installations on the Sym- map do not change.
* # 0031 # then green pipe = Danish. Installations on the Sym- map do not change.
* # 0032 # then green pipe = French Ustanovki on the Sym- map they do not change.
* # 0034 # then green pipe = Spanish. Installations on the Sym- map do not change.
* # 0039 # then green pipe = Italian. Installations on the Sym- map do not change.
* # 0049 # then green pipe = German. Installations on the Sym- map do not change.
* # 0090 # then green pipe = Turkish. Installations on the Sym- map do not change.
* # 0003 * then the secret code of 8 numbers and # - removal SP Lock
* # 9999 # Master reset (without the sym- map)
* # 9337 # To formatirovat' file system (without the sym- map)

Blockings SMS
Entering SMS:
* # eshch*0000*y' # then green pipe - checking status;
* eshch*0000*y' # then green pipe - to include blocking;
# eshch*0000*y' # then green pipe - to turn off blocking.
Outgoing SMS:
* # ee*0000*y' # then green pipe - checking status;
* ee*0000*y' # then green pipe - to include blocking;
# ee*0000*y' # then green pipe - to turn off blocking.

Further go "secrets" for changing coding speech, but in our country they thus far are not supported.
* 3370 # then green pipe - start Enhanced Full Rate
# 3370 # then green pipe - disconnection Enhanced Full Rate
* 4720 # then green pipe - start Half Rate Mode
# 4720 # then green pipe - disconnection Half Rate Mode

, in order to use some service services of your operator of connection
and in this case not to go into the office of servicing subscribers for
their connection, there are standard GSM- codes, which work with all
GSM- apparatuses. The feasibility of some of them, true, depends on
that, is supported your operator the corresponding services. (symbol @
it indicates the pressure of the key for the promise of call (OK)

To change PIN- code
To change PIN: ** 0ya*star.pin*nov.pin*nov.pin#@
To change PIN2: ** 0ya2*star.pin2*nov.pin2*nov.pin2#@
To unblock SIM- map
To unblock PIN: ** 0shch*.PUK*nov.pin*nov.pin#@
To unblock PIN2: ** 0shch2*.PUK2*nov.pin2*nov.pin2#@
Readdressing the call (service it must be ordered in operator)
To abolish all readdressings: ## 002#
To abolish all conditional readdressings: ## 004#
To activate all conditional readdressings: ** 00ya*Nomer#@
Unconditional readdressing (all bells)
To turn off and to deactivate the unconditional readdressing: ## 21#
To deactivate the unconditional readdressing: #2y#
To include and to activate the unconditional readdressing: ** 2y*Nomer#@
To include the unconditional readdressing: * 21#
To verify the state of the unconditional readdressing: * # 21#
Readdressing "there is no answer"
To turn off and to deactivate readdressing "there is no answer": ## 61#
To deactivate readdressing "there is no answer": #'y#
To include and to activate readdressing "there is no answer": ** 'y*Nomer#@
To include readdressing "there is no answer": * 61#
To verify readdressing state "there is no answer": * # 61#
Readdressing "it is inaccessible"
To turn off and to deactivate readdressing "it is inaccessible": ## 62#
To deactivate readdressing "it is inaccessible": #'2#
To include and to activate readdressing "it is inaccessible": ** '2*Nomer#@
To include readdressing "it is inaccessible": * 62#
To verify readdressing state "it is inaccessible": * # 62#
Readdressing "it is occupied"
To turn off and to deactivate readdressing "is occupied": ## 67#
To deactivate readdressing "is occupied": #'"#
To include and to activate readdressing "is occupied": ** '"*Nomer#@
To include readdressing "is occupied": * 67#
To verify readdressing state "is occupied": * # 67#
Time setting of bell to the wear and tear of readdressing "there is no answer"
To establish waiting time on N=5..30 seconds: ** 'y*Nomer**.N#@
To remove the previous installation: ## 61#
With the installation of readdressing "there is no answer" you can
assign the time in seconds, which the system gives to you to raising of
tube. If in this time you did not raise tube, the entering bell will be
re-addressed.
Example:
** 'Y*+"09shchyиyashch'"**e0# establishes the waiting time of 30 seconds
Prohibition of the call (service it must bat' it is ordered in operator)
To change password (PAIRS) for all prohibitions (initial - 0000): **
0e*ee0 * of star.PAR * of nov.PAR * of nov.PAR # of @(**0e**star.par...)
Prohibition of all outgoing bells
To activate the prohibition of all outgoing bells: ** EE*PAR.#
To deactivate the prohibition of all outgoing bells: #EE*PAR.#
To verify the state of the prohibition of all outgoing bells: * # 33#
Prohibition of all bells
To activate the prohibition of all bells: ** EE0*PAR.#
To deactivate the prohibition of all bells: #EE0*PAR.#
To verify the state of the prohibition of all bells: * # 330#
Prohibition of all outgoing international bells
To activate the prohibition of all the outcome of the international bells: ** EEY*PAR.#
To deactivate the prohibition of all the outcome of the international bells: #EEY*PAR.#
To verify the state of the prohibition of all the outcome of the international bells: * # 331#
Prohibition of all outgoing bells
To activate the prohibition of all outgoing bells: ** EEE*PAR.#
To deactivate the prohibition of all outgoing bells: #EEE*PAR.#
To verify the state of the prohibition of all outgoing bells: * # 333#
Prohibition of all entering bells
To activate the prohibition of all entering bells: ** ESHCH*PAR.# or ** ESHCHE*PAR.#
To deactivate the prohibition of all entering bells: #ESHCH*PAR.# or #ESHCHE*PAR.#
To verify the state of the prohibition of all entering bells: * # 35# or * # 353#
Prohibition of all entering bells with rouminge
To activate the prohibition of all entrance. Bells with rouminge: ** ESHCHY*PAR.#
To deactivate the prohibition of all entrance. Bells with rouminge: #ESHCHY*PAR.#
To verify the state of the prohibition of all entrance. Bells with rouminge: * # 351#
Expectation of the call (service it must bat' it is ordered in operator)
To activate the expectation of the call: * 43#
To deactivate the expectation of the call: #yae#
To verify the state of the expectation of the call: * # 43#
It posylka/zapret the determination of the number of your telephone with the bell
To activate mapping the number of that ringing on your telephone: * 30#
To deactivate mapping the number of that ringing on your telephone: #e0#
To verify mapping the number of that ringing on your telephone: * # 30#
Posylki/zapreta of the message of number for the entering bells
To activate the message of the number of your telephone: * 77 #
To deactivate the message of the number of your telephone: #""#
To verify the message of the number of your telephone: * # 77#